INTRODUCCIÓN CURSO DISEÑO Y ADMINISTRACIÓN DE REDES (MIKROTIK MTCNA)

The student must have a good understanding of TCP/IP and subnetting.

 

En este curso aprenderás de que es capaz un mikrotik. En este curso te enseñamos, por ejemplo  a configurar servidores DHCP, Firewall, enrutamiento basico, configurar redes wifi.

 

CONTENIDOS

Módulo 1: Introduction

  • About MikroTik
    •  What is RouterOS
    •  What is RouterBOARD
  • First time accessing the router
    • WinBox and MAC-WinBox
    • WebFig and Quick Set
    • Default configuration
  • RouterOS command line interface (CLI)
    • Null Modem cable
    • SSH and Telnet
    • New terminal in WinBox/WebFig
  • RouterOS CLI principles
    • <tab>, double <tab>, “?”, navigation
    • Command history and its benefits
  • Initial configuration (Internet access)
    • WAN DHCP-client
    • LAN IP address and default gateway
    • Basic Firewall – NAT masquerade
  • Upgrading RouterOS
    • Package types
    • Ways of upgrading
    • RouterBOOT firmware upgrade
  • Router identity
  • Manage RouterOS logins
  • Manage RouterOS services
  • Managing configuration backups
    • Saving and restoring the backup
    •  Difference between a backup and an export (.rsc) file
    • Editing an export file
  • Resetting a RouterOS device
  • Reinstalling a RouterOS device (Netinstall)
  • RouterOS license levels
  • Sources of additional information
    • wiki.mikrotik.com
    • forum.mikrotik.com
    • mum.mikrotik.com
    • Distributor and consultant support
    • support@mikrotik.com
  • Module 1 laboratory

Módulo 2: DHCP

  • DHCP server and client
    •  DHCP client
    • DHCP server setup
    • Leases management
    • DHCP server network configuration
  • Address Resolution Protocol (ARP)
    • ARP modes
    • RouterOS ARP table
  • Module 2 laboratory

Módulo 2: Bridging

  • Bridging overview
    • Bridge concepts and settings
    • Creating bridges
    • Adding ports to bridges
  • Bridge wireless networks
    • Station bridge
  • Module 3 laboratory

 

Módulo 4: Routing

  • Routing overview
    • Routing concepts
    • Route flags
  • Static routing
    • Creating routes
    • Setting default route
    • Managing dynamic routes
    • Implementing static routing in a simple network
  • Module 4 laboratory

 

Módulo 5: Wireless

  • 802.11a/b/g/n/ac Concepts
    • Frequencies (bands, channels) data-rates / chains (tx power, rx sensitivity, country regulations)
  • Setup a simple wireless link
    • Access Point configuration
    • Station configuration
  •  Wireless Security and Encryption
    • Access List
    • Connect List
    • Default Authenticate
    • Default Forward
    • WPA-PSK, WPA2-PSK
    • WPS accept, WPS client
  • Monitoring Tools
    • Snooper
    • Registration table
  • Module 5 laboratory

Módulo 6: Firewall

  • Firewall principles
    • Connection tracking and states
    • Structure, chains and actions
  • Firewall Filter in action
    • Filter actions
    • Protecting your router (input)
    • Protection your customers (forward)
  • Basic Address-List
  • Source NAT
    • Masquerade and src-nat action
  • Destination NAT
    • dst-nat and redirect actions
  • FastTrack
  • Module 6 laboratory

 

Módule 7: QoS

  • Simple Queue
    • Target
    • Destinations
    • Max-limit and limit-at
    • Bursting
  • One Simple queue for the whole network (PCQ)
    • pcq-rate configuration
    • pcq-limit configuration
  •  Module 7 laboratory

Módulo 8: Tunnels

  • PPP settings
    • PPP profile
    • PPP secret
    • PPP status
  • IP pool
    • Creating pool
    • Managing ranges
    • Assigning to a service
  • Secure local network
    • PPPoE service-name
    • PPPoE client
    • PPPoE server
  • Point-to-point addresses
  • Secure remote networks communication
    • PPTP client and PPTP server (Quick Set)
    •  SSTP client
  • Module 8 laboratory

 

Módulo 9: Misc

  • RouterOS tools
    • E-mail
    • Netwatch
    • Ping
    • Traceroute
    • Profiler (CPU load)
  • Monitoring
    • Interface traffic monitor
    • Torch
    • Graphs
    • SNMP
    • The Dude
  • Contacting support@mikrotik.com
    • supout.rif, autosupout.rif and viewer
    • System logs, enabling debug logs
    • Readable configuration (item comments and names)
    • Network diagrams
  • Module 9 laboratory

 

Examen MTCNA (MikroTik Certified Network Associate )

Laboratorio Final de Certificación